Crestron IM-WCC-M iMedia Wall Plate Computer Center Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.
Crestron IM-WCC-M iMedia Wall Plate Computer Center Contents iMedia Wall Plate Computer Center: IM-WCC-M 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications.................................................................................................................
Crestron IM-WCC-M iMedia Wall Plate Computer Center iMedia Wall Plate Computer Center: IM-WCC-M Introduction Features and Functions • • • • • A simple, affordable wall plate computer interface Streamlined user controls for foolproof operation iMedia transport for fast and easy single cable installation Supports XGA resolution up to 84 feet (25.6 meters), UXGA maximum up to 34 feet (10.
iMedia Wall Plate Computer Center Crestron IM-WCC-M Foolproof Operation Every iMedia system is easy and intuitive to use. A single press of the large SELECT button on the face of the IM-WCC-M lowers the screen or lift, turns on the projector (or plasma, etc.) and routes the connected computer signal to the appropriate input.
Crestron IM-WCC-M iMedia Wall Plate Computer Center Internal Block Diagram The following diagram represents the signal routing and functions of the IM-WCC-M. Internal Block Diagram of the IM-WCC-M VGA BUTTON SELECT Microprocessor Power Power Supply IM Output LED VOLUME COMPUTER AUDIO A/D Specifications Specifications for the IM-WCC-M are listed in the following table.
iMedia Wall Plate Computer Center Crestron IM-WCC-M IM-WCC-M Specifications (Continued) SPECIFICATION DETAILS Dimensions Height 4.50 in (11.43 cm) Width 4.56 in (11.59 cm) Depth 2.81 in (7.13 cm) Weight 0.85 lbs (0.39 kg) Physical Description This section provides information on the connections, controls and indicators available on your IM-WCC-M. IM-WCC-M Physical View 4 • iMedia Wall Plate Computer Center: IM-WCC-M Operations & Installation Guide – DOC.
Crestron IM-WCC-M iMedia Wall Plate Computer Center IM-WCC-M Physical Dimensions - Front View Top View 4.56 in (11.59 cm) 3.38 in (8.59 cm) 1 4.50 in (11.43 cm) 2 3 4 SideView Rear View 2.81 in (7.13 cm) 2.42 in (6.14 cm) 2.34 in (5.95 cm) 5 Operations & Installation Guide – DOC.
iMedia Wall Plate Computer Center Crestron IM-WCC-M Connectors, Controls & Indicators # CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION 1 SELECT (1) Pushbutton with green LED; Momentary press initiates “system power on” command and selects local COMPUTER input; press and hold for five seconds or more initiates “system power off”. 2 VOLUME (1) Rotary knob, adjusts audio level for local input. Microphone level is adjusted by holding the SELECT button and turning the VOLUME knob.
Crestron IM-WCC-M iMedia Wall Plate Computer Center 2. For optimum performance, Crestron strongly recommends using CRESCAT-IM cable, available from Crestron. Other high quality, low skew (15 ns per 100 m maximum) CAT5e/CAT6 wiring may also be used with varying performance. 3. To determine which is pin 1 on the cable, hold the cable so that the end of the eight pin modular jack is facing away from you, with the clip down and copper side up. Pin 1 is on the far left. 4. Ensure the unit is properly grounded.
iMedia Wall Plate Computer Center Crestron IM-WCC-M Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. IM Wiring Using a proprietary signal routing solution, RGBHV, audio, power and control signals are all transported using a single cable solution called iMedia.
Crestron IM-WCC-M iMedia Wall Plate Computer Center Maximum Resolution and Cable Length (Continued) RESOLUTION XGA (1024 X 768) SXGA (1280 X 1024) UXGA (1600 X 1200) REFRESH RATE (HZ) PIXEL RATE (MHZ) PIXEL TIME (NS) MAX LENGTH (FEET) 60 70 85 60 75 85 60 70 85 65.00 75.00 94.50 108.00 135.00 157.50 162.00 189.00 229.50 15.4 13.3 10.6 9.3 7.4 6.3 6.2 5.3 4.4 84.6 73.3 58.2 50.9 40.7 34.9 34.0 29.1 24.0 218.
iMedia Wall Plate Computer Center Crestron IM-WCC-M IM-WCC-M Installation in a Two-Gang Electrical Box Standard Two-Gang Electrical Box Screws (4) #6-32 x 1" Ground Wire NOTE: To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the specifications table.
Crestron IM-WCC-M iMedia Wall Plate Computer Center Hardware Hookup Make the necessary connections as called out in the illustrations that follow this paragraph. Turn on the system only after all connections have been made.
iMedia Wall Plate Computer Center Crestron IM-WCC-M NOTE: The maximum continuous current from equipment under any external load conditions shall not exceed a current limit that is suitable for the minimum wire gauge used in interconnecting cables. The ratings on the connecting unit's supply input should be considered to prevent overloading the wiring. System Configuration Refer to the latest version of the IM-RXV1 & IM-RXV3 guide (Doc. 6478) or the IM-RXV1-M & IM-RXV3-M guide (Doc.
Crestron IM-WCC-M iMedia Wall Plate Computer Center Operation The IM-WCC-M can be used to turn a system on or off, adjust volume or adjust the microphone level. Turn on the System Press the SELECT button to turn on the system with the signals routed to the IM receiver. The associated LED will light. Adjust Volume Turn the volume knob clockwise to raise the volume of the input; turn counterclockwise to lower the volume of the input.
iMedia Wall Plate Computer Center Crestron IM-WCC-M Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. IM-WCC-M Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION SELECT LED does not illuminate when SELECT button is pressed. Not receiving power.
Crestron IM-WCC-M iMedia Wall Plate Computer Center Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number.
iMedia Wall Plate Computer Center Crestron IM-WCC-M Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron IM-WCC-M iMedia Wall Plate Computer Center This page is intentionally left blank. Operations & Installation Guide – DOC.
iMedia Wall Plate Computer Center Crestron IM-WCC-M This page is intentionally left blank. 18 • iMedia Wall Plate Computer Center: IM-WCC-M Operations & Installation Guide – DOC.
Crestron IM-WCC-M iMedia Wall Plate Computer Center This page is intentionally left blank. Operations & Installation Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 6620A (2018829) 09.07 Specifications subject to change without notice.
