Installation guide

QuickMedia
®
Computer Centers Crestron QM-FBCC/WCC-1
20  QuickMedia
®
: QM-FBCC/WCC-1 Operations & Installation Guide – DOC. 6716B
Hardware Connections for the QM-WCC-1 (Front and Rear Views)
NET:
To Control
System And
Other Cresnet
Devices
QM:
QuickMedia Port
Carries Aaudio,
Video, RGB And
MIC Output Over
CAT5
PC:
VGA Video
From PC
AUDIO:
Unbalanced
Stereo Audio
Input
Hardware Connections for the QM-WCC-1 (Side and Bottom Views)
Ground
QM:
QuickMedia Port
Carries Aaudio,
Video, RGB And
MIC Output Over
CAT5
NOTE: Ensure the unit is properly grounded by connecting the ground
wire to an earth ground (building steel).
NOTE: For optimum performance, Crestron strongly recommends using
CresCAT-QM cable, available from Crestron. Other high-quality/low
skew CAT5e/CAT6 wiring may also be used with varying performance.
NOTE: The maximum continuous current from equipment under any
external load conditions shall not exceed a current limit that is suitable
for the minimum wire gauge used in interconnecting cables. The ratings
on the connecting unit's supply input should be considered to prevent
overloading the wiring.