Installation guide

Crestron QM-FBCC/WCC-1 QuickMedia
®
Computer Centers
Operations & Installation Guide – DOC. 6716B QuickMedia
®
: QM-FBCC/WCC-1  15
more than two midpoints (e.g. QM-MD7x2 or other QM switchers).
Refer to the following diagram when configuring a QM network.
NOTE: The aggregate length from transmitter to receiver cannot have a
delay skew of more than 22 ns.
QM Network Topology
Identity Code
NOTE: This device does not support TSID.
The Net ID of the QM-FBCC/WCC-1 has been factory set to 8E. The
Net IDs of multiple QM-FBCC/WCC-1 devices in the same system must
be unique. Net IDs are changed from a personal computer (PC) via
Crestron Toolbox™ (refer to “Establishing Communication” on page 24).
When setting the Net ID, consider the following:
 The Net ID of each unit must match an ID code specified in the
SIMPL™ Windows program.
 Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.