Installation guide

Crestron QM-FBCC/WCC-1 QuickMedia
®
Computer Centers
Operations & Installation Guide – DOC. 6716B QuickMedia
®
: QM-FBCC/WCC-1  13
Setup
Network Wiring
When wiring the Cresnet
®
network, consider the following:
 Use Crestron Certified Wire.
 Use Crestron power supplies for Crestron equipment.
 Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Please use the Crestron Power
Calculator to help calculate how much power is needed for the
system (www.crestron.com/calculators).
 For networks with 20 or more devices, use a Cresnet Hub/Repeater
(CNXHUB) to maintain signal quality.
For more details, refer to “Check Network Wiring” which starts on page
27.
QuickMedia Wiring
The Crestron QuickMedia cable (sold under the name “CresCAT-QM”)
contains one CAT5E cable and one Cresnet cable in Siamese jackets.
Installation of any QM device is as simple as installing CresCAT-QM
wires from the output of one device to the input of another. Installations
are flexible, affordable and fast. For more information, refer to the latest
revision of the Crestron MediaManager Applications Guide (Doc. 6244),
which is available from the Crestron Web site.