Installation guide

QuickMedia
®
Computer Centers Crestron QM-FBCC/WCC-1
12  QuickMedia
®
: QM-FBCC/WCC-1 Operations & Installation Guide – DOC. 6716B
Connectors, Controls, & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
6
QM
2, 3
8
1
(1) 8-wire RJ-45 female,
QuickMedia output port;
Connects to QM input port of
any QuickMedia device via
CresCAT-QM or CresCAT-IM
cable
7
Grounding Wire
(1) Flying lead, grounding wire
1. An interface connector for the NET port is provided with the unit.
2. For QuickMedia wiring, use CresCAT-QM, CresCAT-IM or quality
CAT5e/CAT6 cable with a delay skew of ≤ 15 ns per 328 feet (100 meters); the
maximum aggregate cable length and delay skew between any QM transmitter
(origination point) and QM receiver (endpoint) is 450 feet (137 meters) and 22 ns;
a maximum of two QM midpoint devices may be inserted in a given QM signal
path; exceptions apply, refer to each respective product manual for details.
3. The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying
audio, video and microphone signals. The QM input port conforms to the 568B
wiring standard. Refer to the following table for connector pinouts.
RJ-45 PIN
NUMBER
WIRE COLORS
(EIA 568B)
QM
ASSIGNMENT:
RGB
QM ASSIGNMENT:
COMPOSITE, S-VIDEO,
COMPONENT AND
AUDIO
1
WHITE/ORANGE
- RGB RED
- CHROMINANCE (- P
r
)
2
ORANGE
+ RGB RED
+ CHROMINANCE (+ P
r
)
3
WHITE/GREEN
- RGB GREEN
- LUMINANCE (- Y)
4
BLUE
+ DIGITAL AUDIO
+ DIGITAL AUDIO
5
WHITE/BLUE
- DIGITAL AUDIO
- DIGITAL AUDIO
6
GREEN
+ RGB GREEN
+ LUMINANCE (+ Y)
7
WHITE/BROWN
- RGB BLUE
- COMPOSITE (- P
b
)
8
BROWN
+ RGB BLUE
+ COMPOSITE (+ P
b
)