Installation guide

Crestron IM-TCC iMedia Table Mount Computer Center
Setup
Network Wiring
CAUTION: In order to ensure optimum performance over the full range of
your installation topology, Crestron Certified Wire, and only Crestron Certified
Wire, should be used. Failure to do so, may incur additional charges if support is
required to identify performance deficiencies as a result of using improper wire.
CAUTION: Use only Crestron power supplies for Crestron equipment. Failure
to do so could cause equipment damage or void the Crestron warranty
Installation
The IM-TCC is designed to mount to the underside of a horizontal surface, such
as a desktop, lectern, or podium, in a cutout area.
Tools Required
• Phillips screwdriver
• Small flat-blade screwdriver (for connecting the VGA cable)
NOTE: The IM-TCC mounting brackets can accommodate virtually any
thickness.
Mounting Parts Supplied with the IM-TCC
PART DESCRIPTION QUANTITY
Screw #8-32 x 1 in, Pan Head, Phillips 4
Mounting Bracket, Right (2012702) 1
Mounting Bracket, Left (2012704) 1
Bracket Dimensions
Operations & Installation Guide – DOC. 6383 iMedia Table Mount Computer Center: IM-TCC • 7