Installation guide

iMedia Table Mount Computer Center Crestron IM-TCC-M
Bracket Dimensions
0.75 in
(1.91 cm)
0.89 in
(2.25 cm)
0.44 in
(1.11 cm)
7.48 in
(18.99 cm)
0.90 in
(2.28 cm)
1.45 in
(3.68 cm)
1.91 in
(4.83 cm)
7.60 in
(19.30 cm)
0.75 in
(1.91 cm)
The following assumes that a rectangular cutout for the IM-TCC-M (refer to the
cutout dimensions in the following diagram, not drawn to scale) has been made in
the mounting surface. A template is included to provide accurate measurements.
Cutout Diagram
6 7/16 in
(163 mm)
1 3/8 in
(35 mm)
1. Position the IM-TCC-M in the mounting hole or in the underside location.
2. Install the left and right brackets using the cover screws provided. (Steps 1
and 2 should be reversed for an underside location installation.)
3. For cutout mounting, install the supplied #8-32 screws and tighten the
screws equally until they contact the backside of the mounting surface.
For underside location mounting, use four #6 hardware (not supplied) to
secure the unit to the underside of the surface.
Cutaway View of Cutout Mounting
10 • iMedia Table MountComputer Center: IM-TCC-M Operations & Installation Guide – DOC. 6636A