Installation guide

Crestron IM-FTCC-M iMedia FlipTop Computer Center
2. Thread the cables through the appropriate slots on the plate.
3. Snap the bushings into the plate slots.
4. Feed all the excess cable through the opening.
5. Attach the plate using the four #4-40 x ¼” black screws.
6. Connect the cables to the appropriate connectors on the bottom of the
IM-FTCC-M.
7. The cables may be secured to the bottom bar using tie wraps.
Cable Plate Installation (IM-FTCC-M Shown)
Screws (4)
#4-40 x ¼”
Large Bushing
Small Bushing
Operations & Installation Guide – DOC. 6610A iMedia FlipTop Computer Center: IM-FTCC-M • 13