Installation guide

iMedia FlipTop Computer Center Crestron IM-FTCC-B
iMedia Pin Assignment
RJ-45 Male Connector RJ-45
Pin
Number
Wire Colors iMedia
Assignment
RGB & Audio
NOTE: Power is supplied to pins 4 and 5 from the IM receivers.
Signal Selection
The RGB signal connected to the IM transmitter is delivered to the display
device (e.g., projector) via the RGBHV output of an IM receiver. Each IM
transmitter possesses a SELECT button, which activates that input. The receiver
automatically routes the last activated input to the RGB output and deactivates
any prior selection. In addition, the display's power and input selection
commands can be controlled via the IR or COM port.
Video Resolution and Cable Length
The receiver can accomplish frequency compensation on each input to achieve
correct operation. This compensation scheme is effective for CresCAT-IM
cables as long as the maximum skew of 15 ns per 100 m is not exceeded.
NOTE: For proper operations and performance of every iMedia system, always
use CresCAT-IM cable.
Maximum Resolution and Cable Length
RESOLUTION REFRESH
RATE
(HZ)
PIXEL
RATE
(MHZ)
PIXEL
TIME
(NS)
MAX
LENGTH
(FEET)
VGA 60 25.18 39.7 218.5
(640 X 480) 72 31.50 31.7 174.6
85 36.00 27.8 152.8
SVGA 56 36.00 27.8 152.8
(800 X 600) 72 50.00 20.0 110.0
85 56.25 17.8 97.8
XGA 60 65.00 15.4 84.6
(1024 X 768) 70 75.00 13.3 73.3
85 94.50 10.6 58.2
SXGA 60 108.00 9.3 50.9
(1280 X 1024) 75 135.00 7.4 40.7
85 157.50 6.3 34.9
UXGA 60 162.00 6.2 34.0
(1600 X 1200) 70 189.00 5.3 29.1
85 229.50 4.4 24.0
1 White/Orange - RGB Red
2 Orange + RGB Red
3 White/Green - RGB Green
4 Blue + Audio/Power
5 White/Blue - Audio/Power
6 Green + RGB Green
7 White/Brown - RGB Blue
Pin 1
8 Brown + RGB Blue
12 • iMedia FlipTop Computer Center: IM-FTCC-B Operations & Installation Guide - DOC. 6349A