Installation guide

Crestron IM-FTCC-B iMedia FlipTop Computer Center
Controls, Connectors & Indicators (continued)
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
4 This is a grounded AC socket.
125 VAC at 60 Hz. Connect the six-foot (183 cm)
grounded AC line cord to supply AC power to the
outlet on the topside of the IM-FTCC-B.
This is a grounded AC socket.
250 V, 50-60 Hz at 10 A max. The IMI-FTCC-B is
equipped with a standard IEC-320 electrical
appliance coupler. The IEC (International
Electrotechnical Commission) is the international
standards and conformity assessment body for all
fields of electrotechnology.
5
AUDIO
The 3.5 mm computer audio connector provides an
unbalanced stereo line-level audio input.
Maximum input level 2 V
RMS
Input impedance 10k Ohms
IM
This eight-pin RJ-45 transport port allows
connection of the iMedia cable. It carries audio and
video signals over CresCAT-IM cable to an iMedia
receiver (IM-RX1 or IM-RX3). For more information
on iMedia cable length refer to the chart on page
6
. 12
7
COMPUTER
PIN 1
PIN 6PIN 15
This female DB15HD connector is used for
connecting a computer’s RGB video output to the
display device. A corresponding 3.5mm mini-jack is
provided for the computer sound card output.
Maximum input voltage 1.0 V
p-p
(R/G/B), 5.0 V
p-p
(H/V)
Input Impedance 75 Ohms (R/G/B), 1 k Ohms
(H/V)
Refer to the following table for RGB DB15HD pin-
assignments.
PIN FUNCTION PIN FUNCTION
1 Red Video 9 No Connect
2 Green Video 10 Ground
3 Blue Video 11 No Connect
4 Reserved 12 Monitor
Sense 1
5 Ground 13 Horizontal
Sync
6 Red Ground 14 Vertical Sync
7 Green
Ground
15 Monitor
Sense 2
8 Blue Ground
8 Lug for grounding your equipment.
Operations & Installation Guide – DOC. 6349A iMedia FlipTop Computer Center: IM-FTCC-B • 9