Installation guide

Crestron HD-SCALER High-Definition Video Scaler
Operations & Installation Guide – DOC. 7136B High-Definition Video Scaler: HD-SCALER
•
3
Built-In Test Patterns
To ensure optimum performance and proper setup without necessitating any
additional test equipment, the HD-SCALER includes a complete assortment of
professional video test patterns. These include various color bars, line and grid
patterns, RGB and grayscale ramps, streak and streak boost, raster, solid colors, and
several aspect ratio boxes. Even as a portable device, the HD-SCALER provides an
invaluable setup tool.
Audio Capabilities
Normally, the audio source follows the active video input, passing up to 8-channel
digital audio via HDMI and 2-channel analog audio alongside RGBHV. However,
the audio breakaway capability of the HD-SCALER also allows combining analog
audio with digital video from an HDMI or DVI source, embedding the analog audio
and digital video signals into one HDMI output.
Unparalleled System Integration
The HD-SCALER is well-suited for a wide range of applications including
boardrooms and classrooms, home entertainment, rental and staging, and digital
signage. Its simple set-and-forget nature and compact size let it go anywhere a
high-quality video scaler is needed. In addition, built-in Cresnet connectivity
allows for remote control over input selection and numerous other functions.
The HD-SCALER can be powered through the Cresnet connection or via a local
power pack (included).
Digital Upgrade for Legacy Systems
The HD-SCALER is ideal for adding digital connectivity and scaling to existing AV
systems. Through a single VGA cable, its RGBHV input can be connected directly to
the output of a Crestron MPS system or QuickMedia receiver, converting every
analog RGB, component, S-video,* and composite* video signal to HDMI and
scaling the output to feed a high-definition digital display or projector. Analog audio
is converted similarly through a simple stereo audio cable. Digital AV sources are
easily accommodated via the HDMI input, which can be expanded simply using a
Crestron QuickSwitch HD
®
HDMI Switcher (HD-MD8X1 or HD-MD8X2, sold
separately).
* The RGBHV input can accept component, composite, and S-video signals via direct interface to
Crestron MPS Series products or through an appropriate adapter (not included). Composite and
S-video signals are not detected automatically and must be selected programmatically or manually.