Installation guide

Crestron HD-SCALER High-Definition Video Scaler
Operations & Installation Guide – DOC. 7136B High-Definition Video Scaler: HD-SCALER
•
17
Hardware Hookup
Make the necessary connections as called out in the following illustrations. Refer to
“Network Wiring” on page 14. Apply power after all connections have been made.
Hardware Connections for the HD-SCALER (Left Side View)
AUDIO IN:
From Unbalanced
Stereo Line Level
Audio Source
PWR:
From Power Pack
(Included)
RGBHV IN:
From RGB
(VGA)
or
Component (YP
b
P
r
)
Video Source
HDMI IN:
From HDMI
Source
HDMI OUT:
To HDMI Display/
Receiver
NET:
From Cresnet
Power Supply/To
Cresnet Device
Ground
Hardware Connections for the HD-SCALER (Right Side View)
COMPUTER:
To USB Port on PC
(For Firmware
Loading Only)
NOTE: Ensure that the unit is properly grounded by connecting the chassis ground
lug to an earth ground (building steel).
NOTE: The supported power supply configuration is either the external power pack
(included) or a Cresnet power supply. A Cresnet power supply and the included
power pack cannot be connected to the HD-SCALER at the same time.