Installation guide

Crestron HD-SCALER High-Definition Video Scaler

Operations & Installation Guide – DOC. 7136B High-Definition Video Scaler: HD-SCALER

•

HD-SCALER Specifications (Continued)

SPECIFICATION DETAILS

Available Accessories

CBL-AUDIO Crestron Certified Mini-TRS Stereo Audio

Interface Cable

CBL-HD Crestron Certified HDMI Interface Cable

CBL-HD-DVI Crestron Certified HDMI to DVI Interface

Cable

CBL-HD-LOCK Locking High-Speed HDMI Cable

CBL-VGA Crestron Certified Computer VGA

Interface Cable

CBL-VGA-AUD Crestron Certified Computer VGA

Interface Cable with Mini-TRS Audio

CRESNET Cresnet Control Cable

1. The RGBHV input can accept component, composite, and S-video signals via direct interface to

Crestron MPS Series products or through an appropriate adapter (not included). However, composite

and S-video signals are not detected automatically and must be selected programmatically or

manually.

2. HDMI IN requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort

multimode signal. HDMI OUT requires an appropriate adapter or interface cable to accommodate a

DVI signal. CBL-HD-DVI interface cables sold separately.

3. With or without reduced blanking.

4. With reduced blanking only.

5. EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that

enables a display device to tell the source device what resolutions and formats it can support, allowing

the source to configure itself automatically to feed the best signal that both devices can support.