Specifications

Crestron HD-MD8X1/2 QuickSwitch HD™ HDMI Switchers
an alternative to conventional IR and RS-232 device control by harnessing the CEC
(Consumer Electronics Control) signal embedded in HDMI. Through its connection
to the control system, the HD-MD8X1 and HD-MD8X2 provide a gateway for
controlling many devices right through their HDMI connections, potentially
eliminating the need for any dedicated control wires or IR probes. Through proper
CEC signal management, Crestron allows you to take control of each device as you
like.
Adagio
®
Media System Expansion
The HD-MD8X1 and HD-MD8X2 provide transparent input expansion for the
Crestron AMS, increasing its input capacity to 10 full-featured HDMI inputs with all
signal routing controlled right through the AMS's front panel and remote. Adding an
HD-MD8X1 or HD-MD8X2 to an AMS system is made simple using Adagio
Composer software.
Computer Compatibility
Besides handling every available HDTV format supported by HDMI, the
HD-MD8X1 and HD-MD8X2 also support computer resolutions up to 1920 x 1200
WUXGA, and are compatible with DVI and DisplayPort Multimode computer
signals using a suitable adapter or dongle (not included).
Audio Breakaway
Audio signals may be routed independent of video in the HD-MD8X1 and
HD-MD8X2, allowing listening to one source while viewing another. For instance,
listen to your favorite music from your media server while playing a video game or
surfing the Internet on screen.
Front Panel Controls
The HD-MD8X1 and HD-MD8X2 work right out of the box without requiring any
connection to a control system or computer, providing intuitive signal switching via
the front panel. The front panel is great for everyday use, or may be used just for
initial system testing. Front panel buttons may be locked out to prevent unauthorized
tampering or accidental switching, while the LED indicators remain active to show
signal routing status. The input and output controls can be labeled easily using
Crestron Engraver software or standard 3/8” (10 mm) tape labels.
Native Crestron Control
Via the choice of Cresnet or high-speed Ethernet, the HD-MD8X1 and HD-MD8X2
allow direct communication with any Crestron 2-Series control system for a fully
integrated signal routing solution as part of any high-end home theater, boardroom,
classroom, or command center system.
Easy Setup
Despite their many powerful features and capabilities, the HD-MD8X1 and
HD-MD8X2 are simple to set up using Crestron Toolbox™ software. The Toolbox
setup tool allows the installer to view information about each HDMI device and
easily make intelligent choices to ensure a reliable system setup.
Operations Guide – DOC. 6714A QuickSwitch HD™ HDMI Switchers: HD-MD8X1/2 • 3