Specifications

QuickSwitch HD™ HDMI Switchers Crestron HD-MD8X1/2
“HD-MD8X1” or “HD-MD8X2” in the Model textbox, the unit’s serial
number in the Serial textbox or the unit’s hostname in the Hostname
textbox. The hostname can be found in the “System Info” window in the
section marked Ethernet however, communications must be established in
order to see this information in the “System Info” window.
2. Display the HD-MD8X1 or HD-MD8X2’s “System Info” window (click the
icon); communications are confirmed when the device information is
displayed.
TCP/IP
Ethernet Communication
ETHERNET
PC RUNNING
CRESTRON TOOLBOX
HD-MD8X1/2
The HD-MD8X1 and HD-MD8X2 connect to a PC via Ethernet:
1. Establish indirect / USB communication between HD-MD8X1 or
HD-MD8X2 and PC.
2. Enter the IP address, IP mask and default router of the HD-MD8X1 or
HD-MD8X2 via the Crestron Toolbox (Functions | Ethernet Addressing);
otherwise enable DHCP.
3. Confirm Ethernet connections between HD-MD8X1/2 and PC. If
connecting through a hub or router, use CAT5 straight through cables with
8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to
connect the two LAN ports directly without using a hub or router.
4. Use the Address Book in Crestron Toolbox to create an entry for the
HD-MD8X1/2 with the HD-MD8X1/2’s TCP/IP communication
parameters.
5. Display the “System Info” window (click the
icon) and select the
HD-MD8X1 or HD-MD8X2 entry.
Programs and Firmware
Program or firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron website as
new features are developed after product releases. One has the option to upload
programs via the programming software or to upload and upgrade via the Crestron
Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help
file or the Crestron Toolbox help file.
SIMPL Windows
If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.
Firmware
Check the Crestron website to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
Upgrade HD-MD8X1/2 firmware via Crestron Toolbox.
1. Establish communication with the HD-MD8X1 or HD-MD8X2 and display
the “System Info” window.
2. Select Functions | Firmware… to upgrade the HD-MD8X1/2 firmware.
22 • QuickSwitch HD™ HDMI Switchers: HD-MD8X1/2 Operations Guide – DOC. 6714A