Installation guide

QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2
Route Mode
Signals coming into the switcher can be switched to the output(s). Additionally, the
audio and video portions of an input signal can be switched simultaneously or
separately.
To enter the Route mode, press the ROUTE button. The ROUTE LED lights.
Switch Audio and Video
Simultaneously
1. Press the A and V buttons to select the audio and video portions for
switching. The respective LEDs light.
NOTE: If an output has different audio or video portions, a new route
causes the audio portion on the output to switch to the newly selected video
input.
2. Press the button corresponding to the input to be switched. The LED of the
selected input lights. To turn off an output, deselect the input.
3. Press the button(s) corresponding to the output(s) to be switched.
The LED(s) of the selected output(s) light and the new route is connected.
4. Repeat for any other routes to be changed.
Switch Audio and Video
Separately
1. Press the A or V buttons to select the audio or video portions to be
switched. The respective LEDs light.
2. Press the button corresponding to the input to be switched. The LED of the
selected input lights. To turn off an output, deselect the input.
3. Press the button(s) corresponding to the output(s) to be switched.
The LED(s) of the selected output(s) light.
4. Repeat for any other routes to be changed.
22  QuickSwitch HD HDMI Switcher: HD-MD8X1/HD-MD8X2 Operations & Installation Guide – DOC. 6714B