Installation guide

ManualsBrandsCrestron ManualsComputer equipmentHD-MD8X1

QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2

18  QuickSwitch HD

HDMI Switcher: HD-MD8X1/HD-MD8X2 Operations & Installation Guide – DOC. 6714B

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device

contains the latest firmware to take advantage of the most recently released features.

However, before attempting to upload or upgrade, it is necessary to establish

communication. Once communication has been established, files (for example,

programs or firmware) can be transferred to the control system (or device). Finally,

program checks can be performed (such as changing the device ID or creating an IP

table) to ensure proper functioning.

NOTE: Crestron software and any files on the Web site are for authorized Crestron

dealers and Crestron Service Providers (CSPs) only. New users must register to

obtain access to certain areas of the site (including the FTP site).

Establishing Communication

Use Crestron Toolbox for communicating with the HD-MD8X1/2; refer to the

Crestron Toolbox help file for details. There are three methods of communication:

indirect, USB, and TCP/IP.

Indirect

Indirect Communication

PC Running

Crestron Toolbox

HD-MD8X1/2

Serial,

or USB

LAN

Cresnet

Control

System

COMPUTER

PWR

NET

HW-R

SW-R

ACQUIRE

ACTIVITY

MC3

NET

Y Z G

24 Y Z G

SETU

COMPUTE

LAN

OUTP

INPUT

., RO

076

HD-MD8X1/2 connects to control system via Cresnet:

1. Click Tools | System Info.

2. Click the

icon.

3. For Connection Type, select Cresnet ID. In the Through drop-down menu,

select the control system.

4. Click OK. Communications are confirmed when the device information is

displayed.

USB

NOTE: Required for initial setup of Ethernet parameters.

USB Communication