Crestron HD-MD8X1/HD-MD8X2 ® ® QuickSwitch HD HDMI Switcher Operations & Installation Guide
Regulatory Compliance As of the date of manufacture, the HD-MD8X1 and HD-MD8X2 have been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Contents QuickSwitch HD HDMI Switcher: HD-MD8X1/HD-MD8X2 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications.................................................................................................................
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher QuickSwitch HD HDMI Switcher: HD-MD8X1/ HD-MD8X2 Introduction QuickSwitch HD® switchers from Crestron® enable high-performance HDMI® signal selection while delivering fast, trouble-free switching of all DVD and Blu-ray Disc® players, HDTV receivers, media servers, game consoles, multimedia computers, surround processors, and high-definition displays in a system.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Features and Functions (Continued) Manages HDCP digital rights management for all connected devices Performs automatic AV signal format management via EDID HD-SCALER option (sold separately) ensures optimal image quality for all sources Includes front panel controls with security lockout Allows audio breakaway switching Simple setup and diagnostics via software Native control system integration via Ethernet or Cresnet® Single-space
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Computer Compatibility Besides handling every available HD format supported by HDMI, the HD-MD8X1/2 also supports computer resolutions up to 1920 x 1200 WUXGA, and is compatible with DVI and DisplayPort Multimode computer signals using a suitable adapter or dongle*. Audio Breakaway Audio signals may be routed independently of video in the HD-MD8X1/2, allowing listening to one source while viewing another.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Applications The following diagram shows an HD-MD8X2 in a residential application. HD-MD8X2 in a Residential Application Internal Block Diagram The following diagram represents the switching abilities of the HD-MD8X1/2. Internal Block Diagram of the HD-MD8X1/2 Digital Video Switch HDMI RX (8) HDMI TX (1 or 2) Digital Audio Switch 4 QuickSwitch HD HDMI Switcher: HD-MD8X1/HD-MD8X2 Operations & Installation Guide – DOC.
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Specifications Specifications for the HD-MD8X1/2 are listed in the following table.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 HD-MD8X1/2 Specifications (Continued) SPECIFICATION DETAILS Video (Continued) Output Resolutions Matched to inputs Audio Switcher HD-MD8X1: 8 x 1 digital multichannel switching, audio-follow-video or breakaway HD-MD8X2: 8 x 2 digital multichannel switching, audio-follow-video or breakaway Input Signal Types HDMI, DisplayPort Multimode* Output Signal Type HDMI Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher HD-MD8X1/2 Specifications (Continued) SPECIFICATION DETAILS Available Accessories * CBL-HD Crestron Certified HDMI Interface Cable CBL-HD-DVI Crestron Certified HDMI to DVI Interface Cable CBL-HD-LOCK Locking High-Speed HDMI Cable DMCI DigitalMedia Card Interface HD-DA-2 1-to-2 HDMI Distribution Amplifier and Audio Converter HD-EXT1-C HDMI over Shielded Twisted Pair Extender HD-EXT2-C HDMI over Shielded Twisted Pair Extender HD-RX1
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Physical Description This section provides information on the connections, controls, and indicators available on the HD-MD8X1/2. HD-MD8X1 Physical Views (Front and Rear) HD-MD8X2 Physical Views (Front and Rear) 8 QuickSwitch HD HDMI Switcher: HD-MD8X1/HD-MD8X2 Operations & Installation Guide – DOC.
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher HD-MD8X1/2 Overall Dimensions (HD-MD8X2 Shown) 9.75 in (248 mm) 10.06 in (256 mm) 17.03 in (433 mm) 1.70 in (44 mm) HD-MD8X1/2 Connectors, Controls, and Indicators (HD-MD8X2 Shown) 1 2 4 3 6 5 8 9 7 10 Operations & Installation Guide – DOC.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Connectors, Controls, and Indicators # CONNECTORS1, CONTROLS, AND INDICATORS 1 PWR LED (1) Green LED, indicates 24 Vdc power supplied from Cresnet control network 2 NET LED (1) Amber LED, indicates communication with Cresnet system 3 SYNC (Button and LED) (1) Recessed push button and red LED, selects Sync mode for viewing input signal sensing 4 VIEW (Button and LED) (1) Push button and red LED, selects View mode for viewing current rout
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Connectors, Controls, and Indicators (Continued) # CONNECTORS1, CONTROLS, AND INDICATORS NET 15 24 Y Z G 24 Y Z G DESCRIPTION (2) 4-pin 3.5 mm detachable terminal blocks; Cresnet slave ports, paralleled 24: Y: Z: G: 16 G Power (24 Vdc) Data Data Ground (1) 6-32 screw, chassis ground lug 1. Interface connectors for the NET ports are provided with the unit. 2.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Setup Network Wiring When wiring the Cresnet and Ethernet network, consider the following: Use Crestron Certified Wire. Use Crestron power supplies for Crestron equipment. Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (www.crestron.com/calculators).
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Installation Ventilation The HD-MD8X1/2 should be used in a well-ventilated area. The venting holes should not be obstructed under any circumstances. To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications. Consider using forced air ventilation and/or incrementing the spacing between units to reduce overheating.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 To install the ears: CAUTION: To prevent equipment damage, use only the rack ears Crestron provides for this device. 1. There are screws that secure each side of the HD-MD8X1/2 top cover. Using a #2 Phillips screwdriver, remove the three screws closest to the front panel from one side of the unit. Refer to the diagram following step 3 for a detailed view. 2.
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Hardware Hookup Connect the Device Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 12 before attaching the 4-position terminal block connectors. Apply power after all connections have been made.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Examples of Reported HDCP Devices and Reported HDCP Depth Device # 2 Device # 1 Blu-ray Player 2 HDCP Devices Reported Depth = 1 Blu-ray Player 3 HDCP Devices Reported Depth = 1 HD-MD8X1/2 Switcher HDMI Reported Depth = 1 Reported Depth = 0 Device # 1 Device # 2 HD-MD8X2 Switcher HDMI Display Using HDMI with HDCP HDMI Display Using HDMI with HDCP HDMI Reported Depth = 1 Reported Depth = 0 Device # 3 Display Using HDMI with HDCP HD
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher EDID EDID is a data structure that HDMI receivers use to indicate their capabilities to the HDMI sources. The HD-MD8X1/2 routes HDMI signals from any of the eight video inputs to one or two (HD-MD8X2 only) output channels. According to the HDMI standard, HDMI sources are expected to only deliver audio and video formats that are supported by the destination. To configure video/audio EDID, use the DMTool in Crestron Toolbox.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade, it is necessary to establish communication. Once communication has been established, files (for example, programs or firmware) can be transferred to the control system (or device).
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher The COMPUTER port on the HD-MD8X1/2 connects to the USB port on the PC via the included Type A to Type B USB cable: TCP/IP 1. Click Tools | System Info. 2. Click the 3. For Connection Type, select USB. When multiple USB devices are connected, identify the HD-MD8X1/2 by entering “HD-MD8X1” or “HD-MD8X2” in the Model text box, the unit’s serial number in the Serial text box or the unit’s hostname (if known) in the Hostname text box. 4.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Program Checks Actions that can be performed on the HD-MD8X1/2 vary depending on whether it is connected via Cresnet or Ethernet. Cresnet Connections For Cresnet connections, using Crestron Toolbox, display the network device tree (Tools | Network Device Tree View) to show all network devices connected to the control system. Right-click on the HD-MD8X1/2 to display actions that can be performed on the HD-MD8X1/2.
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Operation Operating Modes The HD-MD8X1/2 can operate in the Sync, View, or Route mode. Sync Mode The Sync mode uses the front panel controls to view the presence of video signals on each input. Press the SYNC button to activate the Sync mode. The SYNC LED lights as well as the LEDs of any inputs with a video signal present. View Mode The View mode uses the front panel controls to view routing information for inputs and output(s).
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Route Mode Signals coming into the switcher can be switched to the output(s). Additionally, the audio and video portions of an input signal can be switched simultaneously or separately. To enter the Route mode, press the ROUTE button. The ROUTE LED lights. Switch Audio and Video Simultaneously 1. Press the A and V buttons to select the audio and video portions for switching. The respective LEDs light.
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. HD-MD8X1/2 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Device is not communicating with the network. Use Crestron Toolbox to poll the network. Verify network connection to the device.
QuickSwitch HD HDMI Switcher Calculate Power Crestron HD-MD8X1/HD-MD8X2 CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so could cause equipment damage or void the Crestron warranty. CAUTION: Provide sufficient power to the system. Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (www.crestron.com/calculators).
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher Further Inquiries To locate specific information or resolve questions after reviewing this guide, contact Crestron's True Blue Support at 1-888-CRESTRON [1-888-273-7876] or, for assistance within a particular geographic region, refer to the listing of Crestron worldwide offices at www.crestron.com/offices. To post a question about Crestron products, log onto Crestron’s Online Help at www.crestron.com/onlinehelp.
QuickSwitch HD HDMI Switcher Crestron HD-MD8X1/HD-MD8X2 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron HD-MD8X1/HD-MD8X2 QuickSwitch HD HDMI Switcher This page is intentionally left blank. Operations & Installation Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 6714B (2023605) 09.13 Specifications subject to change without notice.
