Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
60 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B
Appendix C: Specifications
IPAC-GL1 Specifications
SPECIFICATION DETAILS
Processor
CPU 32-bit Freescale ColdFire
®
Microprocessor
Memory
SDRAM
NVRAM
Flash
Power Failure Memory
32 MB
1 MB
8 MB
10 years
Time Clock Accuracy ±1 minute per year
Operating System Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file
system with long names; includes default program for Green Light
Power Switching systems
Ethernet 10/100BASE-T, auto-negotiating, full/half duplex, static IP or DHCP,
DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server
and e-mail client; supports Crestron e-Control
®
2 XPanel and
RoomView
®
applications.
IR Receiver
Reception Frequency
Formats
Range
36 to 38 kHz IR
Crestron format, RC5
Up to 50 feet (15 meters) line of sight typical, dependent on angle,
obstructions, IR interference and IR remote signal strength
Power
Cresnet Power Usage
Available Cresnet
Power
10 Watts (0.42 A @ 24 VDC); GLA-PWS50 or equivalent power supply
required (sold separately)
40 Watts using GLA-PWS50 power supply (sold separately)
Environmental
Temperature
Humidity
Heat Dissipation
32º to 104 º F (0 º to 40 º C)
10% to 90% RH (non-condensing)
20 BTU/Hr
Enclosure
Faceplate
Chassis
Mounting
Plastic, black or white, with polycarbonate label overlay
Plastic with steel mounting plate
Requires 3-gang plaster ring or electrical box (not included),
≥ 2.5 in (64 mm) deep recommended
Dimensions
Height
Width
Depth
4.50 in (115 mm)
6.70 in (171 mm)
2.24 in (57 mm)
Weight 1.32 lbs (0.60 kg)
Available Models
IPAC-GL1-B-T
IPAC-GL1-W-T
IPAC Integrated Professional Automation Computer for Power
Switching (Black)
IPAC Integrated Professional Automation Computer for Power
Switching (White)
(Continued on following page)