Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
IPAC-GL1 Buttons & Ports
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1
LIQUID CRYSTAL
DISPLAY
The Liquid Crystal Display (LCD) shows
system information such as lighting controls
and system status.
2 SOFT BUTTONS
The functions of the soft buttons are
dependent on which “page” the display is
currently showing. Labels will appear above
each button indicating their current function.
3 FUNCTION BUTTONS
(7) Programmable pushbuttons with backlit
labeling and LED feedback. Referred to as
the front panel keypad.
4 ENTER BUTTON
ENTER button performs the “default” action
for the current page.
5 SELECTION KNOB
(1) Continuous turn rotary encoder, used for
on-screen navigation.
6 LIGHT SENSOR
Photosensor, used for auto-adjustment of
function label backlight.
7
INFRARED (IR)
RECEIVER
Not used in the default program but can be
used in a custom program. Refer to “Appendix
A: Programming Software” on page 55 for
more information.
(Continued on following page)
2 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B