Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
6. To change a setting, turn the selection knob to highlight the parameter to
adjust and press the soft button labeled Edit. Otherwise, press the soft
button labeled Done.
Adjusting Ethernet Settings
Ethernet Settings
IP Addr: [172].030.161.025
Mask: 255.255.241.000
Router: 172.030.160.002
Set Done
a. Turn the selection knob to display the desired number.
b. Press the ENTER button to move the cursor to the next octet.
c. Repeat steps a and b for each octet until the desired IP address is
displayed.
d. Press the soft button labeled Set to store the new address.
7. To exit the Ethernet Settings section of the Setup Menu, press the soft
button labeled Done.
50 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B