Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
Enter Password
The front panel of the IPAC can be locked using with password protection. If a
password was created, a password is required to unlock the keypad. To enter the
password when prompted:
1. Open the Password section of the Setup Menu as described on the previous
page.
Enter Password
Clear OK
Enter Password
[ ]
2. Turn the selection knob until the first letter of the password is displayed.
3. Press ENTER to move the cursor to the next letter of the password.
To move the cursor to the beginning of the password, press ENTER until
the cursor is at the beginning of the password.
4. Turn the selection knob to display the next letter of the password.
5. Repeat steps 3 and 4 until the desired password is displayed.
To erase the displayed entry, press the soft button labeled Clear.
6. Press the soft button labeled OK. If a mistake was made, press the soft
button labeled Clear to clear the password and start over.
Once the password is entered, it can be changed or removed. For details,
refer to step 2 of “Create/Edit Password” on page 47.
48 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B