Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
Input 2 on DIN-IO8 with Net ID D4
INPUT 2
⇒ Device C0.1 represents a sensor connected to sensor input 1 on a
GLS-SIM with Net ID C0.
Input 1 on GLS-SIM with Net ID C0
⇒ Device CC.2 represents the sensor connected to sensor input 2 on a
GLS-SIM with Net ID CC.
Net IDs for sensor inputs are assigned as shown in the following table:
Net IDs Assignments for Sensor Inputs
NET ID Value(s) Device Type
C0.1/2 through D3.1/2 GLS-SIM
D4.1-8 through D8.1-8 DIN-IO8
NOTE: All DIN-IO8 and GLS-SIM modules must be given unique Net
IDs. Two or more modules having the same ID will cause unpredictable
behavior. Additionally, a GLS-SIM with a Net ID outside of the GLS-SIM
range of Net IDs or a DIN-IO8 with a Net ID outside of the DIN-IO8 range
of Net IDs may conflict with other devices on the network.
40 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B