Setup guide

Crestron IPAC-GL1 Integrated Professional Automation Computer
If Custom… is selected, specific days of the week can be chosen.
For example, if lights are needed for a later hour on one day of the
week.
Custom Days
Next
Timeclock Event-Custom
Occurs on:
Su
M Tu W Th F Sa
X X X X X X X
Turn the selection knob to highlight a day to be marked and press
the ENTER button to mark it (noted with an “X”). To unmark a
day, press the ENTER button again.
2. After all the days for an event have been marked, press the soft
button labeled Next to choose the clock to be referenced.
Select Reference Clock
Next
Standard
Sunrise
Sunset
Clock type:
Timeclock Event - Ref
Events can reference three different clocks:
⇒ Standard – Uses a specific time of day to activate the
timeclock event.
⇒ Sunrise – Activates the timeclock event with reference to
sunrise (up to two hours before or after sunrise).
⇒ Sunset – Activates the timeclock event with reference to
sunset (up to two hours before or after sunset).
NOTE: Sunrise and sunset times are governed by the date as
well as the location of the project as set by the city and state
chosen earlier. Refer to “Project Settings” on page 9 for
details.
Setup Guide – DOC. 6660B Integrated Professional Automation Computer: IPAC-GL1 • 31