Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
To set the time when a workday ends:
1. Turn the selection knob to highlight End of Workday and press
the soft button labeled Edit. Brackets will appear around the hour
digit.
Set End of Workday Time
Next
Timeclock Event - Time
[05] : 00 PM
SelectNext
2. Turn the selection knob to display the desired hour.
3. Press the ENTER button to move the cursor between the hour,
minute, and AM/PM.
4. Use the selection knob and the ENTER button to display the “End
of Workday” time.
5. When the correct time is displayed, press the soft button labeled
Next to set the “End of Workday” time.
• Custom Timeclock Event
To add a timeclock event, turn the selection knob to the first empty
event (listed as ---) and press the soft button labeled Add.
To edit a timeclock event turn the selection knob to the event to be
edited and press the soft button labeled Edit.
Event Occurrence
X
Next
Weekdays
Weekends
Holidays
Custom...
Occurs
on:
X
1. Select the day(s) when the timeclock event will occur. Use the
selection knob to highlight an item and press the ENTER button to
mark it (noted with an “X”). To unmark a day, press the ENTER
button again.
30 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B