Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
3. Press ENTER to toggle the load state. Warn loads are marked with an X.
To select all of the loads, press the soft button labeled Set All. To clear all
of the loads, press the soft button labeled Clr All.
4. After all desired warn loads have been marked, press the soft button labeled
Next.
NOTE: Prior to a load being turned off due to a timeclock event, “warn
loads” will turn off briefly and then turn back on. The defined Warn Time
(refer to “Set Timeclock Warn Time” on page 27) determines how long
before the event these lights will flash. After the warn flash occurs, pressing
any keypad button which affects any of the lights in that timeclock event
will postpone the event for one hour.
Add/Edit Timeclock Events
Up to 100 timeclock events can be defined. To add/edit an event:
1. Press HOME to navigate to the home page.
2. From the home page, press the soft button labeled TmClk or set the
timeclock warn loads as described on page 27. A list of fixed (“Start of
Workday” and “End of Workday”) and custom events will be displayed.
NOTE: Events with a “+H” or the word “Holiday” are on the holiday
schedule.
Time Clock Events List
Edit Exit
Start of Workday
End of Workday
1. Wkday 2:17AM
---
Time
Clock
Evnts
SelectEdit
28 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B