Setup guide

Crestron IPAC-GL1 Integrated Professional Automation Computer
4. Turn the selection knob to highlight a button to program and press the
ENTER button or the soft button labeled Edit.
Select Button Type (Button 1 on the Front Panel Keypad Shown)
Next
On
Off
Toggle
Custom
Select
Btn
Type
B0.1
SelectNext
Each button is assigned an ID number. For information on button
assignments, refer to “Button Function Worksheet” in the latest version of
the IPAC-GL1 System Planning Worksheets.
If viewing/editing a button that has been previously programmed, the
selected function will be highlighted.
5. Turn the selection knob to highlight a function from the list of available
functions and press the ENTER button or the soft button labeled Next to
configure the button’s function. Buttons can be programmed with the
following functions:
⇒ On – Turns one or more loads on.
⇒ Off – Turns one or more loads off.
⇒ Toggle – Toggles one or more loads on and off.
⇒ Custom – Allows individual loads to be turned on or off as desired.
⇒ Enter Override (IPAC function buttons only) – Places the system into
the Manual Override mode.
⇒ Exit Override (IPAC function buttons only) – Takes the system out of
Manual Override mode.
⇒ Enter/Exit Override (IPAC function buttons only) – Toggles Manual
Override mode on and off.
⇒ Lock Keypads (IPAC function buttons only) – Locks external
keypads.
⇒ Unlock Keypads (IPAC function buttons only) – Unlocks external
keypads.
⇒ Lock/Unlock Keypads (IPAC function buttons only) – Toggles
between external keypads unlocked/locked.
⇒ Disable Timeclock (IPAC function buttons only) – Disables the
timeclock.
⇒ Enable Timeclock (IPAC function buttons only) – Enables the
timeclock.
Setup Guide – DOC. 6660B Integrated Professional Automation Computer: IPAC-GL1 • 21