Setup guide

Integrated Professional Automation Computer Crestron IPAC-GL1
d. Press the soft button labeled Yes to set the all loads to perform the
programmed function or press the soft button labeled No to cancel.
e. To clear the function from all of the loads and set the loads to be
unaffected by the button press, press the soft button labeled Clr All.
Clear All
Yes No
L1.1 = Off
L1.2 = ---
L1.3 = Off
L1.4 = ---
Select
Loads
B0.1
Clear programming and
change loads to
unaffected?
SelectNo
f. Press the soft button labeled Yes to clear programming and set the
loads to be unaffected by the button press or press the soft button
labeled No to cancel.
6. Press the soft button labeled OK to save the settings and return to the list of
keypads.
7. After all of the buttons have been configured, press the soft button labeled
Exit.
Program/Edit a Keypad
Button Manually
Keypad buttons can be configured to operate the IPAC for a variety of functions. To
program a button:
1. Open the Keypads section of the Setup Menu as described on page 15.
2. Turn the selection knob to highlight a keypad to program.
3. Press ENTER or the soft button labeled Edit to display the configuration
information for the selected keypad.
Configuration Information for Keypad (Keypad 0, Front Panel Keypad Shown)
Copy Paste Next
Button 1 (empty)
Button 2 (empty)
Button 3 (empty)
Button 4 (empty)
Select
Btn
KP-0
SelectEdit
Button functionality from the selected keypad can be copied to other
buttons in the network. Additionally, functions from a button on another
keypad in the network can be copied to a button on the selected keypad. For
more information, refer to “Copy/Paste” on page 23.
20 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B