Setup guide

Crestron IPAC-GL1 Integrated Professional Automation Computer
⇒ Lock (IPAC function buttons only) – Locks front panel keypad. Can
only be opened with a password. Refer to “Password” on page 47 for
more information.
⇒ Unlock (IPAC function buttons only) – Unlocks front panel keypad.
⇒ Lock/Unlock (IPAC function buttons only) – Toggles between front
panel keypad unlocked/locked.
5. If a button is set to On, Off, Toggle, or Custom, the loads that will be
affected by the button press must be selected.
Select Loads for Button
Set All Clr All OK
L1.1 = Off
L1.2 = ---
L1.3 = Off
L1.4 = ---
Select
Loads
B0.1
SelectAdjust
a. A list of loads will be displayed. Each load is assigned a Load ID. For
example:
 Load L1.1 represents circuit number 1 in panel 1.
 Load L3.16 represents circuit number 16 in panel 3.
Affected loads will have the function listed next to their Load ID.
Loads that will not be affected will have --- next to their Load ID.
b. To select a load to be controlled, turn the selection knob to the desired
load and press the ENTER button. The assigned function will be
displayed. To deselect a load, press the ENTER button again to display
---.
c. To select all of the loads, press the soft button labeled Set All.
Set All
Yes No
L1.1 = Toggle
L1.2 = ---
L1.3 = Toggle
L1.4 = ---
Select
Loads
B1.1
Set the current
programming to toggle all
loads?
SelectNo
Setup Guide – DOC. 6660B Integrated Professional Automation Computer: IPAC-GL1 • 19