Setup guide

Crestron IPAC-GL1 Integrated Professional Automation Computer
Set the Current Time
Set the Time
Edit Next
Set Current Time
4 : 21 : 08 PM
To set the time:
1. Press the soft button labeled Edit. Brackets will appear around the hour
digit.
2. Turn the selection knob to display the current hour.
3. Press the ENTER button to move the cursor between the hour, minute,
seconds, and AM/PM.
4. Use the selection knob and the ENTER button to display the current time.
5. When the correct time is displayed, press the soft button labeled Set.
6. Press the soft button labeled Next to set the Daylight Savings Time mode.
Set the Daylight Savings
Time Mode
The IPAC has the ability to automatically adjust the system clock for daylight
savings time. This feature can also be disabled. To set the Daylight Savings Time
mode:
Set the Daylight Savings Time Mode
Next
Daylight Savings Time
Off
Auto
SelectExit
1. Turn the selection knob to highlight the desired mode.
⇒ Off – The system clock needs to be manually adjusted for Daylight
Savings Time.
⇒ Auto – The system clock will automatically adjust for Daylight
Savings Time.
2. When the correct mode is highlighted, press ENTER or the soft button
labeled Exit to save the settings and return to the Setup Menu.
Setup Guide – DOC. 6660B Integrated Professional Automation Computer: IPAC-GL1 • 11