Setup guide

ManualsBrandsCrestron ManualsHome building and DecorGreen Light IPAC-GL1

Crestron IPAC-GL1 Integrated Professional Automation Computer

INPUTS Port and Associate Functions (Continued)

INPUT # FUNCTION DESCRIPTION

2 Enter Override mode

The system will enter the Override mode when a

device connected to this port provides a dry contact

closure to ground.

3 Lock IPAC

The front panel of the IPAC will be locked when a

device connected to this port provides a dry contact

closure to ground.

4 Lock Keypads

External keypads will be locked when a device

connected to this port provides a dry contact closure

to ground.

For information on wiring the INPUTS port, refer to the latest version of the IPAC

Installation Guide (Doc. 6696) which shipped with your IPAC and is also available

for download from the Crestron website.

Introduction

Use the front panel controls and display to configure the IPAC. The following

controls are used to navigate the front panel display:

• Selection Knob – Turn the selection knob to select the desired option. The

selected option is underlined.

• ENTER Button – Press the ENTER button to select an underlined item or

to store a setting. The ENTER button can also be used to activate a

highlighted soft button function.

• Soft Buttons – Soft buttons perform functions that are listed above them on

the front panel display.

• HOME Button – Press the HOME button to return to the IPAC home page.

If changes were made to the configuration, you will be asked to save

changes.

• BACK Button – Press the BACK button to return to the previous screen.

• CANCEL Button – Press the CANCEL button to cancel the current action.

• HELP Button – Press the HELP button at any time to open the online help

feature. Press again to close the online help.

The display is used to show available options and a variety of information during the

configuration process. Title screens are shown at the top or side of the display.

Configuration options and data are displayed in the center of the display, and

available functions for the soft buttons are located along the bottom of the display.

Soft button functions that are highlighted can be activated by pressing the associated

soft button or the ENTER button.

Display

Copy Paste Next

Button 1

Button 2 (empty)

Button 3 (empty)

Button 4 (empty)

Select

Btn

KP-0

SelectEdit

Highlighted

Function

Setup Guide – DOC. 6660B Integrated Professional Automation Computer: IPAC-GL1 • 7