Specifications

5
quickstart guide
GL-IPAC-SW8
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice.
GL-IPAC-SW8
Crestron Green Light
®
Integrated Switching System
Front Panel Controls
The following is a detailed overview of the front panel controls
on the GL-IPAC-SW8 system.
3
BACK Button:
Press button to go back to the
previous screen while in Setup mode.
Four Soft Buttons:
For making selections based on the
display options shown on screen
above the buttons.
PWR LED:
Illuminates to show that the device is
powered.
NET LED:
Illuminates to show activity on the
Cresnet network.
OVR Button and LED:
Press button to enter Override mode.
LED illuminates to indicate that the
unit is in Override mode.
MSG LED:
Illuminates to show that the processor
has generated an error message.
SW-R Button:
Press button for software reset.
HW-R Button:
Press button for hardware reset.
ENTER Button:
Press button to confirm the current on
screen selection.
CANCEL Button:
Press button to cancel the current
operation while in Setup mode.
Display:
Provides display for setup operations.
HOME Button:
Press button to return to the home
screen.
Up and Down Buttons:
Press the up or down button to navigate between items
on the Setup screens. Also allows scrolling on the Setup
screens when a scroll bar is present on the right side of
the display.
HELP Button:
Press button to display the help dialog
while in Setup mode. The help dialog
provides information for the screen
that is currently displayed.
For Regulatory Compliance information, refer to Doc. 7401.
QUICKSTART DOC. 7389B (2036222, Sheet 3 of 7) 01.14