Specifications

12
quickstart guide
GL-IPAC-SW8
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice.
GL-IPAC-SW8
Crestron Green Light
®
Integrated Switching System
For Regulatory Compliance information, refer to Doc. 7401.
QUICKSTART DOC. 7389B (2036222, Sheet 6 of 7) 01.14
4
Setup: Timeclock (Continued)
(Skip this step if not adding any custom holidays)
If adding a custom holiday, use the up and down arrows to select
- - - from the holiday list and press Add. On the “Timeclock
Event-Custom” screen, add the holiday’s month using the up and
down buttons and then press ENTER. Use the up and down buttons
to select the day and select Next.
Use the up and down buttons to select the duration of the holiday,
between 1 and 99 days.
Press Next to return to the “Setup” menu.
Ethernet Settings: “Ethernet – DHCP” Screen
Select Ethernet Settings from the “Setup” menu to adjust Ethernet
settings.
The GL-IPAC-SW8 can be configured to use a static IP address
(DHCP is off) or to obtain an IP address from a DHCP server (DHCP
is on). If disabling the DHCP mode, Ethernet settings are displayed.
Use the up and down arrows to select the desired DHCP setting: On
or Off.
Press Next to return to the “Setup” menu.
About: “About” Screen
Select About from the “Setup” menu to display information about the
GL-IPAC-SW8’s programming and Ethernet configuration.
Use the up and down buttons to highlight the desired load and
press ENTER to toggle between Auto, On, and Off (Warn). Press
the All On button to turn all loads on or All Off to turn all loads off.
Press All Clr to clear all selections made.
Press OK to save the settings and return to the “Time Clock Evnts”
screen.
All On All Off All Clr
L1.1 (p,o) = On
L1.2 (p,o) = On
L1.3 (o) = On
L1.4 (o) = On
Event
Prog
OK
Ethernet Settings
About
Exit
About
: IPAC v4.008.0004 (Jun 1
Pgrm: GL-IPAC Default Pr
Compiled On: 7/18/2013 1
Next
Timeclock Event-Custom
Holiday Start Date (MM-DD)
[07] - 25
Ethernet – DHCP
DHCP: [Off]
Next