Installation guide

Crestron Green Light Express
®
Power Switching Cabinet GLPX-SW-FT
Installation Guide – DOC. 6886B Crestron Green Light Express
®
Power Switching Cabinet GLPX-SW-FT • 13
Installation
Observe the following when installing the cabinet:
• The cabinet must be mounted by a licensed electrician in accordance with all national and local codes.
Refer to the diagram below for specific requirements.
• The cabinet is designed for surface mounting on a wall.
• Cabinets are intended for indoor use only.
• The ambient temperature range should be 32° F to 104° F (0° C to 40° C). The relative humidity should
range from 10% to 90% (non-condensing). Allow adequate clearance in front of the cover for servicing.
Mounting Location
3 ft
(0.9 m)
Minimum
Required
Clearance
Wall