Installation guide
Table Of Contents
CRESTRON GREEN LIGHT
®
EXPRESS Power Switching Cabinet GLPS-HDSW-FT
Relay Removal Procedure
1. Disconnect the wiring connector on the relay from the GLXX-HDSW.
Disconnecting the Relay from the GLXX-HDSW (Single Pole Relay Shown)
2. To release the relay from the mounting strap, press firmly on the spring clip(s).
3. Pull the relay away from the tabs and lift it out of the mounting strap
Removing the relay from the mounting strap (Double Pole Relay Shown)
Press Down
Tabs
Installation Guide – DOC. 6887A GREEN LIGHT
®
EXPRESS Power Switching Cabinet GLPS-HDSW-FT • 13