Installation guide
Table Of Contents
Power Switching Cabinet GLPS-HDSW-FT CRESTRON GREEN LIGHT
®
EXPRESS
Relay Installation Procedure
1. Insert the output side of the relay into the tab(s) on the mounting strap.
2. Push down on the relay to lock the spring clips into the relay. Refer to the illustration below.
Inserting the relay into the mounting strap (Double Pole Relay Shown)
Tabs
Push
Spring
Clips
3. Attach the wiring connector on the relay to the GLXX-HDSW.
Connecting the Relay to the GLXX-HDSW (Single Pole Relay Shown)
12 • GREEN LIGHT
®
EXPRESS Power Switching Cabinet GLPS-HDSW-FT Installation Guide – DOC. 6887A