Installation guide

DIN Rail Analog Output Module Crestron DIN-AO8
and other devices providing a 0-10V analog input. Ten-bit resolution
ensures precision and smooth ramping between levels.
DIN Rail Installation
The DIN-AO8 is designed to snap onto a standard DIN rail for
installation in a wall mount enclosure or mounted on a wall panel. Wiring
connections are made using detachable screw terminals positioned along
the top and bottom, clearly accessible from the front for easy installation
and servicing. All setup controls and indicators are positioned on the
center front panel. When installed in an enclosure utilizing 45 mm
cutouts, the DIN-AO8’s front panel stays accessible while the
connections are concealed.
Cresnet
®
The DIN-AO8 communicates with a DIN-AP2 2-Series Automation
Processor, or other Crestron
®
2-Series control system, via the Cresnet
control network. Cresnet also powers the DIN-AO8. A pair of Cresnet
ports is provided on the DIN-AO8 allowing for easy daisy-chaining of
several DIN Rail Series automation control modules.
Override Input
An override input is provided to allow an external contact closure to
momentarily override the control system program and set each output to
its override preset level. Levels can be adjusted and saved locally from
the front panel, or remotely via software.
2 • DIN Rail Analog Output Module: DIN-AO8 Operations & Installation Guide – DOC. 6663A