Installation guide

Crestron DIN-AO8 DIN Rail Analog Output Module
Crestron Green Light™ DIN Rail
Analog Output Module: DIN-AO8
Introduction
The DIN-AO8 is a DIN rail-mounted automation control module that
provides eight analog output ports for interfacing with third-party
lighting and heating/cooling systems*.
* Care must be taken when using a control system to directly control HVAC
elements, as opposed to using a dedicated HVAC thermostat or other controller.
Crestron cannot be responsible for damage to equipment or property due to
improper operation of such systems.
Features and Functions
• Eight 0-10V analog output control ports
• Interface for third-party lighting and HVAC
• Fully programmable functionality via DIN-AP2 or other
2-Series control system
• Setup via front panel or software
• Override input
• Cresnet
®
communications
• 6M wide DIN rail mounting
Analog Outputs
Each analog output port provides a 0 to 10 Volt DC control signal ideally
suited for controlling 0-10V lighting dimmers, heating/cooling valves,
Operations & Installation Guide – DOC. 6663A DIN Rail Analog Output Module: DIN-AO8 • 1