Installation guide

Crestron DIN-AO8 DIN Rail Analog Output Module
Problem Solving
Troubleshooting
The following table provides corrective action for possible trouble
situations. If further assistance is required, please contact a Crestron
customer service representative.
DIN-AO8 Troubleshooting
TROUBLE POSSIBLE
CAUSE(S)
CORRECTIVE
ACTION
Device is not
communicating
with the network.
Use Crestron Toolbox
to poll the network.
Verify network
connection to the
device.
Device is not
receiving power
from a Crestron
power source.
Use a Crestron power
source. Verify
connections.
Device does not
function.
Device is not
receiving
sufficient power.
Use the Crestron
Power Calculator to
help calculate how
much power is
needed for the
system.
Loss of
functionality due
to electrostatic
discharge.
Improper
grounding.
Check that all ground
connections have been
made properly.
Check Network Wiring
Use the Right
Wire
In order to ensure optimum performance over the full range of your
installation topology, Crestron Certified Wire and only Crestron Certified
Wire may be used. Failure to do so may incur additional charges if
support is required to identify performance deficiencies because of using
improper wire.
Operations & Installation Guide – DOC. 6663A DIN Rail Analog Output Module: DIN-AO8 • 23