Installation guide

DIN Rail Analog Output Module Crestron DIN-AO8
Save
Override
Levels
The level of each output can be saved as an override setting which can be
automatically recalled when the Override mode is enabled.
NOTE: The control system program has a setting that can prevent
locally saving the override level settings. If this setting is enabled, the
display shows “Er” when trying to save the override level settings. For
more information, refer to the SIMPL Windows help file.
To save the current output level values as override settings, press and
hold the OVR button for three seconds. The OVR LED blinks to indicate
new levels have been stored.
Reset
To reboot the DIN-AO8, press the RESET button. The output levels will
be set to the level currently specified by the control system program. If
the control system does not provide a value, the outputs will be set to the
previously set levels.
22 • DIN Rail Analog Output Module: DIN-AO8 Operations & Installation Guide – DOC. 6663A