Installation guide

DIN Rail Analog Output Module Crestron DIN-AO8
Programming with D3 Pro
Crestron’s D3 Pro lighting software provides all the tools necessary to
create a complete Crestron lighting system for residential applications.
The lighting system includes the control system logic program,
touchpanel projects and keypad programming, documentation and real-
time lighting adjustment capabilities.
As with all Crestron software, D3 Pro provides extensive right-click and
drag-and-drop functionality in addition to convenient keyboard shortcuts
for frequently used functions and commands.
Programming is organized into six system Views of the lighting system,
each providing a moveable toolbox of devices such as interfaces, fixtures
and control modules. You can add a device to your system simply by
selecting it from one of the toolboxes and dragging it to a room. The
available toolboxes differ depending on the View but all Views include a
"General" toolbox that allows you to add areas and rooms at any time.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the DIN-AO8,
it is recommended to use SystemBuilder.
SIMPL Windows is Crestron’s premier software for programming
Crestron control systems. It is organized into two separate but equally
important “Managers”.
Configuration
Manager
Configuration Manager is the view where programmers “build” a
Crestron control system by selecting hardware from the Device Library.
• To incorporate the DIN-AO8 into the system, drag the DIN-AO8
from the Lighting | Lighting (DIN-Rail Series) folder of the Device
Library and drop it in the System Views.
16 • DIN Rail Analog Output Module: DIN-AO8 Operations & Installation Guide – DOC. 6663A