Installation guide

DIN Rail Versiport Module Crestron DIN-IO8
digital output, the Versiport provides a logic level closure signal to
trigger control and alarm inputs on a variety of external devices.
DIN Rail Installation
The DIN-IO8 is designed to snap onto a standard DIN rail for installation
in a wall mount enclosure or mounted on a wall panel. Wiring
connections are made using detachable screw terminals positioned along
the top and bottom, clearly accessible from the front for easy installation
and servicing. All setup controls and indicators are positioned on the
center front panel. When installed in an enclosure utilizing 45 mm
cutouts, the DIN-IO8’s front panel stays accessible while the connections
are concealed.
Cresnet
®
The DIN-IO8 communicates with a DIN-AP2 2-Series Automation
Processor, or other Crestron
®
2-Series control system, via the Cresnet
control network. Cresnet also powers the DIN-IO8. A pair of Cresnet
ports is provided on the DIN-IO8 allowing for easy daisy-chaining of
several DIN Rail Series automation control modules.
2 • DIN Rail Versiport Module: DIN-IO8 Operations & Installation Guide – DOC. 6664A