Installation guide

Crestron DIN-IO8 DIN Rail Versiport Module
Crestron Green Light™ DIN Rail
Versiport Module: DIN-IO8
Introduction
The DIN-IO8 is a DIN rail-mounted automation control module that
provides eight Versiport I/O ports for interfacing with a wide range of
third-party devices and systems. Each “Versiport” can be configured via
software to function as a digital or analog sensing input, or as a digital
trigger output.
Features and Functions
• Eight Versiport I/O ports
• Interface for third-party sensors, detectors, contact closures,
and alarms
• Fully programmable functionality via DIN-AP2 or other
2-Series control system
• Cresnet
®
communications
• 6M wide DIN rail mounting
Versiports
Configured as a digital input, the Versiport will sense a contact closure or
logic level signal from devices such as motion detectors, partition
sensors, alarm panels, 12V triggers, and all types of switches and relays.
As an analog input, the Versiport can sense changes in a resistance or DC
voltage level, working with everything from temperature and light
sensors to water level meters to volume control potentiometers. As a
Operations & Installation Guide – DOC. 6664A DIN Rail Versiport Module: DIN-IO8 • 1