Installation guide

DIN Rail Versiport Module Crestron DIN-IO8
• If necessary, double click a device to open the “Device Settings”
window and change the Net ID as shown in the following figure.
“DIN-IO8 Device Settings” Window
• The ID code specified in the SIMPL Windows program must
match the Net ID of each unit. Refer to “
Identity Code” on page
10.
Program
Manager
Program Manager is the view where programmers “program” a Crestron
control system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it
into Detail View. Each signal in the symbol is described in the SIMPL
Windows help file (F1).
Example Program
An example program for the DIN-IO8 is available from the Crestron
website (
www.crestron.com/exampleprograms).
20 • DIN Rail Versiport Module: DIN-IO8 Operations & Installation Guide – DOC. 6664A