Installation guide

Crestron DIN-IO8 DIN Rail Versiport Module
Connectors, Controls & Indicators (Continued)
# CONNECTORS*,
CONTROLS &
INDICATORS
DESCRIPTION
1 I/O 1-8 and LEDs
(continued)
Analog Input:
Rating: 0-10 Volts DC,
protected to 24 Volts DC
maximum
Input Impedance: 20k ohms
Digital Output: 250 mA sink
from maximum 24 Volts DC,
catch diodes for use with “real
world” loads
Programmable 5 Volts, 2k
ohms pull-up resistor per input
(8) Red LEDs, indicate status of
each respective I/O Versiport
2 NET ID DISPLAY &
CONTROL
(2) 7-Segment green LED digits
and (2) miniature pushbuttons
for setting Net ID and indicating
errors
3 NET (2) 4-pin 3.5mm detachable
terminal blocks, paralleled
Cresnet slave port
Max Wire Size: 1.5 mm
2
(16 AWG)
Pin 1 (24): Power (24 VDC)
Pin 2 (Y): Data
Pin 3 (Z): Data
Pin 4 (G): Ground
(Continued on following page)
Operations & Installation Guide – DOC. 6664A DIN Rail Versiport Module: DIN-IO8 • 7