Specifications

Crestron Commercial Lighting Design Guide
66 Doc. 4775B | Crestron.com
Sample Screen Shots
Above is a LiveView window showing the total
energy usage for a building over one day. The green
portion of the graph represents energy produced by
an on-site renewable energy source. The gray area
is energy provided by the power grid, natural gas or
other sources. Energy use is broken down by area,
usage type, and energy source type in the pie
charts.
Above is an example report (in the PDF standard).
This report shows the energy usage for the ground
floor of the building. The current and average usage
is listed for each room on the ground floor. This data
is also depicted in the pie chart.
The monitor and control window allows a manager
to access each room across an organization. In this
example, the locations are divided by state, city, and
building. After selecting a location, the manager can
view a floor plan, monitor the status of a room, and
make manual adjustments. Upcoming and past
events are shown at the bottom.
The scheduler window allows a manager to
schedule recurring events. This easy to use
interface can set lights to turn on or off at a specified
time, change the room temperature set point, and
perform many other tasks automatically. It also can
schedule temporary overrides for special events.