Specifications

Crestron Commercial Lighting Design Guide
62 Doc. 4775B | Crestron.com
2-Gang Installation
C2N-SSC-2
The C2N-SSC-2 Somfy Shade Controller is a compact Cresnet device designed
to provide a bidirectional serial interface for up to two Somfy ILT Intelligent
Shade Motors (http://www.somfy.com/nam/index.cfm). Window treatments
equipped with the Somfy ILT motor offer enhanced cap
ability compared to
typical 3-wire models.
In addition to basic open/close commands, the C2N-SSC-2 allows for setting
each shade to a specific position and polling for its current position with 16-bit
precision. Feedback signals provide confirmation of each motor's activity to
enable precise, predi
ctable control, even from a remote location. Limit
adjustments are set electronically using buttons provided on the face of the unit,
and up to 20 presets for each output can be saved onboard the C2N-SSC-2 for
easy recall through the control system. The C2N-SSC-2 mounts discreetly to
any flat surface and requires a simple Cresnet connection to the control system.
DIN-2MC2
See DIN-Rail Product Section