Specifications

Crestron Commercial Lighting Design Guide
44 Doc. 4775B | Crestron.com
iLux Room Controllers
CLS-C6
iLux
CLSI-C6
iLux – International (230 V)
CLS-C6M
iLux w/ Motion Detector
CLSI-C6M
iLux w/ Motion Detector – International (230 V)
CLS-
C6EX
iLux w/ infiNET EX
CLSI-C6EX
iLux w/ infiNET EX – International (230 V)
CLS-
C6MEX
iLux w/ Motion Detector
andinfiNET EX
CLSI-
C6MEX
iLux w/ Motion Detector & infiNET EX –
International (230 V)
Control System Integration via infiNET EX
iLux Room Controllers with Crestron’s infiNET EX technology can wirelessly link to a 2-series control system. This
two-way communication link allows the iLux functions to be controlled from touch screens, RF wireless remotes,
and even computers. The control system interface also enables flexibility for integration with other systems such
as security, HVAC and energy management, plus remote monitoring via Crestron RoomView applications.
Note: infiNET EX dimmers and switches are not able to communicate with the iLux directly, since both are “slave”
modules.
Built-in Motion Detector
iLux Room Controllers with the built-in infrared motion detector can automate control based on room occupancy.
iLux can turn on lights and open shades automatically when someone enters the room or turn off and close them
when the room is left empty.
Multi-Unit Expansion
One CLS-C6 type master will support up to eight additional CLS-C6 type units, allowing up to 54 lighting zones
and 54 shade groups. Commands for typical functions like scene recall, scene off, master dimming, and
occupancy status are shared between the CLS-C6 units. Each unit can still support a complete assortment of
local devices including keypads, shade controllers, and motion detectors.