Specifications

Crestron Commercial Lighting Design Guide
Doc. 4775B | Crestron.com 43
iLux
iLux is a complete, integrated lighting system designed for
wall mount installation in boardrooms, auditoriums, theaters,
or anywhere versatile and cost-effective control of lighting
and shades is required. iLux CLS-C6 is available with
different options, including infiNET EX wireless
communications and motion detection.
6 Channel Dimming
Six channels of dimming are available for incandescent,
magnetic low-voltage, neon/cold cathode, and 2-wire
dimmable fluorescent loads. On/off switching of many non-dimmable lighting loads is also possible. Each channel
will handle up to 800 watts individually, with a total rating of 1920 watts for the complete unit. Larger loads and
additional load types can also be supported using Crestron CLS-EXP Series expansion modules.
6 Group Shade Control
Using Crestron networked shade and drape controllers, iLux enables versatile control of a roomful of motorized
window treatments, screens or lifts in up to six groups. Simply add a shade and drape controller from the Shades
section.
Energy Management
With the addition of Green Light integration modules and light sensors, the iLux line of Integrated lighting systems
allow for the management of room occupancy sensing, daylight harvesting and demand response for maximum
energy efficiency and cost savings (ASHRAE 90.1and CEC Title 24 compliant). See the Sensors section for more
details.
Interface Support
The CLS line of room controllers can support up 2 touch panels and up to 16 keypads without a centralized
processor. Individual buttons can be programmed to work through the master unit or can target specific slave
units for maximum control and room management.
iLux Room Controller (CLS-C6M)