Specifications

Crestron Commercial Lighting Design Guide
42 Doc. 4775B | Crestron.com
Products
GLPAC-DIMFLV4(-PM) and GLPAC-DIMFLV8(-PM)
The GLPAC-DIMFLV family is a Crestron Green Light integrated lighting system, designed for use as a
standalone lighting controller in classrooms, conference rooms, and even across multiple offices. While able to
control 4 or 8 channels of dimmable fluorescent loads, each GLPAC also provides a link to a centralized Crestron
lighting control system for control and monitoring. Add optional real-time power monitoring and Crestron
RoomView Enterprise management software to help track and minimize energy usage facility-wide. The GLPAC-
DIMFLV has a LAN port for fast communication with other control processors or directly with RoomView. Its two
Cresnet ports allow one remote connection to a centralized processor or another GLPAC and a local connection
to keypads and touch screens.
• Four or eight channels of 0-10 volt
fluorescent dimming
• Supports 100 to 277 volt applications
• 16 Amp load rating per channel
• Built-in Control System with Cresnet port
• Preloaded program for quick setup
• Optional real time power monitoring
• Control up to four rooms with a single
GLPAC
• Positive air gap at each output
• Phase-independent channels
• Local controls for setup, testing and
verification
• Local and remote override capability
• Non-volatile power failure memory
• Four low-voltage 1A rated relays
(-PM models only)
• Eight digital input ports
• Four occupancy sensor inputs and four
photocell inputs
• Local Cresnet supports keypads, touch
screens, etc.
Load Ratings
Dimmer Channels
GLPAC-DIMFLV4(-PM): 4
GLPAC-DIMFLV8(-PM): 8
Per Channel
16 amps at 100-277 Vac, 50/60 Hz
Dim Load Types
0-10 volt fluorescent ballast (4-wire); 0-10V LED drivers; 60 mA max current sink
Switch Load Types Fluorescent Ballast, Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage,
Neon/Cold Cathode, High-Intensity Discharge, Motor
Relay Lifetime
10,000 on/off operations at full electronic ballast load
Power Requirements
Primary
100-277 Vac, 50/60Hz, supplied via channel 1 (L1, N1)
Available Cresnet Power
10 watts at 24 Vdc, shared with occupancy and photocell sensor ports
Environmental
Temperature
32° to 104°F (0° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic
switches, intended for
fluorescent lamp circuits or other capacitive loads)
CE